Waxing and polishing your vehicle is one of the most fun exercises owners can undertake with their ride because the results are noticeable and provide instant gratification. That being said, to complete each task successfully, you ought to allot ample time for the cleaners and chemicals to do as they are supposed to. Rushing a polish, and particularly a waxing, will actually result in damage because you could be adversely affecting the primer. So how do you apply a wax and polish that leaves your car looking amazing?
Rinse With Warm Water
Using a detergent that is approved for automobiles, apply it using a giant sponge so the suds build up. Soapy cleaners are recommended because they help loosen up dust and pollution that has made a home on your car’s body. Using warm water, rinse off each section thoroughly, starting from the top on down to the wheels. This will make sure chemical residue that remains is at a minimum. The main goal of a wash in preparing it for a polishing is to get rid of the components that do not make the surface area smooth. Things like bugs or sand are good examples of this.
“Placing wax on the body is an enjoyable experience because you will begin to see a mirror-like reflection that looks healthy and strong… The wax will encase the positive properties of the polish you applied in a thin film that is durable and UV resistant”
Shade Is Your Friend For Polish And Waxing
Since you are going to want an area removed from the sun for waxing anyway, place your vehicle in a covered or shade filled area. This is far more important than you may realize, as the sun’s rays will make the compounds dry too quickly. The result is a dull finish with uneven texture and light reflection.
Picking The Right Pad
Before you polish, you need to choose the right applicator pad. The reason why this matters is because the darker your paint job is, the more noticeable swirling lines are. Always remember that a softer pad will be needed for these vehicles.
Keep The Pad Damp With Polish And Wipe By Section
When you apply your polish to the pad, make sure enough is on there that at minimum there are no dry spots. Dry areas on an applicator burn the clear coating on your vehicle. Next, by dividing your car into manageable sections, wipe the polish in a circular fashion. This can also be done with a buffer, however do not press too hard to the finish. At first the polish will smear and appear cloudy, but once it starts to dissipate and the paint appears brighter, it is time to move to the next area.
Seal Your Efforts
Placing wax on the body is an enjoyable experience because you will begin to see a mirror-like reflection that looks healthy and strong. Using a different applicator pad than the polish, use a high grade wax and rub it in by section, just as you did previously. Make sure every inch of the car is serviced. The wax will encase the positive properties of the polish you applied in a thin film that is durable and UV resistant. After the wax has dried, it is time to clean up any leftover residue. You will know the wax is dry if you rub your finger over it and it does not smear. Using a microfiber towel, carefully swipe the surface until the entire vehicle looks as if it is glowing.
Polishing and waxing a car is one of the most valuable projects you can do for its sticker price and appearance, and as such, should be left to auto detailing professionals who are knowledgeable and effective in its craft. With the right experts in Kansas City, MO, handling both of these processes, your automobile’s value will spike exponentially.